It is very important for everyone to understand the importance of safe use of power tools as even little carelessness while using power tools might lead to a major harm to your body. Experienced users always give due importance to this fact and it is this fact which keeps them safe while using these power tools. Even the most experienced of users follow certain safety measures while using power tools, some of them are discussed for you in this article.

The first and the most important step in ensuring one’s safety is to read and follow the instructions on the product manual. This is one measure which cannot and should not be neglected or ignored for the maximum safety of one self.

The next important safety measure is being vigilant and careful while using the power tools. No one can disagree with the fact that no machine can harm a person, if it is handled carefully. Always remember while you are using a power tool, that it is ultimately you who is responsible for your own safety and hence is always better to show little extra care while using them which can prove to be quite hazardous, if used with negligence.

Each and every power tool can be harmful, if used ignorantly without following proper instructions. However, there are some power tools which can harm you majorly, if used improperly. One should be extra cautious while using tools like box cutters and table saws. These two are most popular as frequent manglers of fingers. Also included in this group of potentially dangerous power tools are the radial arm saw, the chain saw and the shaper.

Tool maintenance is one of the key factors which play a major role in ensuring the safety of the user. It is always advisable to keep the power tools in good condition by keeping them sharp, clean and smooth. One should give due importance to the instructions in the product manual when it comes to aligning and cleaning of the power tools. Tool maintenance at regular intervals of time is also a very good idea to ensure complete safety of the user.

The work space should always be clean, well lit and free from any potential distractions. Keeping the work place clean and tidy will save you from any possibilities of tripping and falling on any potentially dangerous tools. Also proper lighting will prevent any major accidents in your work place. It is very important to concentrate on the task in hand while using the power tools as even little bit if distraction can result in a major injury.

Always remember that your safety is in your hands while using the power tools.

Home Improvement and Power Tools – Safety Tips to Keep You Safe

Using power tools for home improvement projects is definitely a great option. They save you time, money, and more. However, many people don’t always know how to use these tools safely….   Read more…

Power Tools Safety and Maintenance

Title: Power Tools Safety and Maintenance, Category: Business, Author: Andrew Stratton, PubDate: 2009-06-13.   Read more…

Power Tool Safety

The simple fact is that running wood working tools for long durations without hearing protection is going to reduce your hearing. Here is the original post: Power Tool Safety – markel.   Read more…

Technorati Tags: power tool safety, power tools, powertools, safety and maintenance

We are all guilty of taking advantage of a bargain. Everybody likes to save money and if that means getting a lesser quality product then most of us will try it out more than once.

However, what usually happens?

The remorse typically sets in after a few uses. Usually after the product breaks or does not perform to the level needed. This is especially true with power tools. It would be impossible to count how many no name brands have hit the tool industry promising to deliver the results of the best at a fraction of the cost.

Con artist jargon, I say!

Ask any career construction worker and they will tell you the truth about these generic imposters. The tools cost less for a reason! Most of them are made out of junk materials sold at junk material prices but promoted as "top of the line quality".

Now, I will be the first to admit that just because something has an extravagant price tag does not mean that it is the best product. However, there is a certain amount of truth in the old phrase "If it sounds too good to be true, it probably is". At least in the power tools industry.

So what is the safest route?

It is my personal opinion that popular brands become popular for a reason. Word of mouth spreads like a wildfire and it typically offers decently trustworthy information.

Companies like Dewalt offer an excellent product that has become a household name. They most certainly do not have the cheapest prices on the market; however, the quality of their power tools suitably justifies their costs.

What does this mean to you?

Well, most notably, this means that if you dish out a few more dollars in your upfront purchase you will ultimately spend less money.

Why?

Because if you buy a bargain power tool and it keeps breaking on you, you will end up spending more money to repeatedly replace the tool. Why struggle with this hassle when you could buy a quality power tool initially and know that it is going to provide long lasting service.

So, I hope that I have offered some valuable insight on this topic and I wish you the best in your endeavor for the best power tools.

Perfect place for power tools

Now, the online shopping is the wonderful resource for simply buying our needed power tools available on the web markets, now many online shops are selling different types of power to…   Read more…

Best Directory for Power Tools

Brand can also be our parameter on buying high quality power tools. Since it is used for the heavy work, the power tools must be made with great durability, with that way, we can …   Read more…

Is It Better Purchasing Name Brand Power Tools Or Discount Tools

Prior to making any purchases, ask yourself how many times are you going to be using each tool. If you are buying a power tool for a particular project, and don’t feel it is exp…   Read more…

Technorati Tags: 24v drills, buying power tools, DIY, power tools, powertools, tools

It can be easy to dismiss the importance of a high-quality battery in the functioning of your cordless tools. As it turns out, however, a good battery is just as essential to a cordless tool as a healthy armature or motor. Battery technology has significantly advanced since the introduction of cordless power tools; since the development of the Nickel Cadmium (NiCad), power tool batteries have evolved from NiCad to Nickel Metal Hydride (NiMH), and most recently to Lithium Ion (Li-Ion) technology.

Nickel Cadmium batteries were the first on the market for cordless power tools and though the technology is older, it is still very reliable. NiCads are less sensitive to adverse temperatures and have a high recharge cycle, meaning they can be charged and recharged repeatedly for a long period of time. NiCads are also less expensive than NiMH and Li-Ion batteries. On the down-side, however, NiCads tend to suffer from battery memory effect. This occurs when a battery can no longer accept a complete charge because it had been repeatedly charged without first being fully depleted. It seems the battery "remembers" how much energy it has discharged, and only wants to accept back that much energy from charger. The element Cadmium is highly toxic making it the most harmful battery to the environment. The NiCad’s negative effects on the environment, in fact, cause them to be heavily taxed outside the U.S.A. As a result, many European vendors won’t sell NiCad batteries.

Nickel Metal Hydride batteries run on a higher amperage than NiCads, because of this, they also have a longer run-time. NiMHs are lighter than NiCads but they are far more sensitive to hot and cold temperatures, in fact, NiMH can’t work in below freezing temperatures (32 degrees Fahrenheit and below) and they degrade very quickly in intensely high temperatures (105 degrees Fahrenheit an up). Although the NiMH has a longer run-time than the NiCad it doesn’t accept as many charges. NiCad and NiMH batteries do have very similar overall lifespans but NiMH has a larger energy storage capacity.

Lithium Ion batteries have a higher energy density than most other rechargeable batteries. A high energy density means that the Lithium Ion has a superior energy to weight ratio storing more energy for their size than most other batteries. Li-Ions have a very slow self-discharge rate meaning they retain their charge for much longer. Most rechargeable batteries significantly deplete as they are disengaged, the slow rate of charge-loss in Li-Ions, however, allows them to maintain most of their charge for longer periods, even on a shelf in your shop or garage.

There are many benefits to working with Lithium Ion batteries from their light-weight, to their long run-time. Li-Ions maintain their charge for much longer and have continuous max power throughout their energy discharge cycle. Other batteries consistently lose power as you work. Li-Ions are light-weight, and have a huge storage capacity, this means you now have a lighter, more efficient and powerful battery without the bulk. Lithium Ion batteries are by a landslide the least detrimental to our environment, and for many reasons they are the favorite of most craftsmen.

There are, however, some disadvantages to Lithium Ion batteries. Li-Ions are a bit more expensive. The complexities of production (in circuitry) accounts for this price difference. Each Li-Ion also requires a specifically built charger to accommodate that type of battery; this means that chargers are more expensive as well, and aren’t universal to all types of Li-Ion batteries. The Li-Ion has a built-in chip that protects the battery from over and undercharging, and ensures it has a longer life. This computer chip, however, doesn’t allow the battery to continue accepting charge once its energy level has dropped below a certain point. Once this happens the battery is essentially dead. Li-Ions also rely on this circuit to stay cool. Since Li-Ions lose charge so slowly, and the battery and charger communicate so well together, it’s fairly simple to keep Lithium Ions temperate and at a safe charge level.

Remember, the quality of the battery you use is just as important as the quality of your power tool. The battery gives the right amounts of energy and finesse to your tools and their working parts.

Power Tool Batteries

Power tool manufacturers now offer many more cordless power tools than before, so the demand for power tool batteries has gone up as well. Power tool batteries vary by bra…   Read more…

Go Through These Guidelines before Purchasing your Power Tool Batteries

Know some vital things about power tool batteries before purchasing them for your power tools.   Read more…

Power Tool Battery Care

However, a power tool without power is really no tool at all and will be of little use to anyone. Yet many power tool batteries lose their power due to improper care…   Read more…

Technorati Tags: 24v drills, battery care, battery replacement, power tool batteries, power tools

In this day and age of DIYs, there is precious little that you can hope to achieve without the essential power tools in your home. Listed below are some of these tools – the ones that you HAVE to have to make life easier.

The corded drill is an essential home repair tool. This versatile tool can be used to drill and drive screws. Please remember that this tool should have variable speed, to control the speed at which the task is performed. A reverse feature and a throw of 3/8′ are additional bonuses.

The cordless drill is one up on the corded drill. One must remember to ask for a demo before purchase, to make sure that the balance and the grip are not a problem. A kit contains two battery packs and a charger, and 12 volts is ideal for home use.

The cordless circular saw belongs to the new era of power tools. The basic units with smaller blades and slower speeds are safe for home use, and can be used to cut and saw. Since they use up a lot of power (18 volts and above), cordless circular saws have restricted battery life. Buying two battery packs would be a smart move to ensure continuous work.

The sabresaw, or the jigsaw, is a flexible power tool that can cut almost any hard material, and can also bevel and crosscut. The tool comes with options in blades, but it is not equipped to cut through thicker materials.

The cordless pivoting head flashlight rotates 90 degrees to cover a wider area. This is an essential tool for any home, and your best friend during an emergency. Always buy the one with the wide beam, with a working light.

The rechargeable spotlight is your best bet when you have to go looking for your lost cat at night. The beam can be spotted a mile away, and you will get 30 minutes of continuous use. Always ask for one that allows hands-free operation.

A heat gun is a must in every household. Its most important function is to dry anything. It can also be used to defrost, soften, as well remove paint, among other things.

Perfect place for power tools

In the modern world, the power tools are very helpful for simply do our hard work without any difficulties, because it will be easily done our hard jobs like Building works, Plumbing, Electrica…   Read more…

Power Tools

Power tools will be very useful in doing some small works in home or garden. We must have all the basic tools in our home and it can be used as and when need arises. It will be really ha…   Read more…

Great New Power Tools From Bosch

BoschTools recently announced several new power tools. Bosch has always been one of my favorite tool manufacturers. They offer great quality tools with super features at reasonabl…   Read more…

Technorati Tags: 24v drills, DIY, home improvement, power tools, powertools

Start with a highly recommended how-to book, such as Better Homes & Gardens – New Complete Guide to Home Repair and Improvement and New Complete Do-It-Yourself Manual by Reader’s Digest.

With knowledge in hand, it’s a good idea to have a basic set of tools. When choosing, experts advise buying the best quality possible. Good tools can last a lifetime and help ensure professional results, while poor ones tend to break, cause frustration and can even damage a project.

A hardware or home center employee can guide you in quality tool selection. Here are the top ten tools that home experts say should be in every toolbox:

1. Toolbox – Start with a sturdy, latching container that can protect the tools and keep them safe, organized, and ready to go.
2. Safety goggles – Safety is the first step in any do-it-yourself project.
3. Screwdrivers – Start with a couple sizes of both flat blade and Phillips types
4. Hammer – Choose a 16-ounce claw model that fits comfortably in your hand, heavy enough to accomplish most tasks but not too heavy.
5. Tape measure – Choose one with a shock resistant case in a bright colour, so it’s easy to spot in your toolbox. For real convenience, try one with a built-in voice recorder to store your measurements like the Zircon Repeater.
6. Slip-joint pliers with wire cutting jaw.
7. Adjustable wrench.
8. Utility or box knife.
9. Drill – This is the one power tool that’s a must.
10. Stud finder – For dozens of home improvement projects a stud finder can be worth its weight in gold. Try the new Zircon StudSensor Pro SL-AC. It finds studs without guesswork and includes a new WireWarning safety feature so you won’t accidentally nail or drill into live AC voltage.

DIY Fashion Toolkit

If you get to like this whole DIY thing, you’ll want to keep a few essential tools and materials on-hand. That way, you never have to worry about being halfway through a project and…   Read more…

DIY Fix It Ideas For Fixing Projects

With some essential tools and some talents you’ll see major savings if you do these jobs on your own. One of the easiest tasks you can do is putting on a new coat of paint. This is one of the…   Read more…

DIY: Essential Tools for your Toolbox

If you’re one of those younger gents who just never got around to stocking a toolbox, below we’ve included a list 12 basic tools that we think every toolbox should have. 2009021712.   Read more…

Technorati Tags: DIY, DIY tools, home improvement, power tools, powertools

In my opinion, power tools are a necessity for home improvement projects. There are no if’s, and’s, or but’s about it. When I tackle a home renovation project, I typically find myself using circular saws, routers, sanders, and jigsaws the most. But what about accessories?

The first of the power tool accessories that we’ll cover is a bit set. It’s important that you have bits in all of the most commonly used sizes to complete various projects around the house. These are a must have.

Other important accessories are alignment tools such as dial indicators, planer pals, protractors, clamp guides, laser guides, and cutting guides. All of these will come in handy while you’re trying to meet deadlines and produce a great looking finished project.

Lastly, when it comes to power tools or accessories, buy good stuff! Many DIY’ers make the mistake of buying cheap, "budget tools" that end up breaking soon after they’re put to work. Resist the temptation to buy cheap powertools just because they’re cheap. Always buy the best stuff that you can afford. Also, in addition to lasting longer, high-quality power tools are easier and safer to use. As my grandfather always said, "Buy it right, buy it once".

Hopefully this short article has given you some ideas on some power tools accessories. Take your time and purchase the best tools money can buy, you’ll be much better off in the long-run as a result.

Hand Power Tools Basic Care

Some of the plastic containers also have allotments for the accessories which may have been included with the hand power tools. If not they may be bought separately in the course of time…   Read more…

Black & Decker Corded Power Tools, Parts And Accessories

The Black & Decker Company was founded almost a hundred years ago by S. Duncan Black and Alonzo G. Decker. The company’s main business then revolved around a small machine shop in Baltimore, Maryl…   Read more…

Power & Hand Tools

Shop Quality Brands of Power Tools,Hand Tools,Power tool accessories, Bosch power tools,Leatherman Multitools, Hitachi,Fein, Rockwell,Dremel and More…   Read more…

Technorati Tags: DIY, home improvement, power tool accessories, power tools, powertools, workshop

The Work Shop

No matter where your work space is, there are a few basic requirements that should be followed for maximum safety. The floor in the room should be flat and level to avoid any tripping or sliding. It is also important that the floor surface be of a non-slip material to avoid any accidents while a power tool is in use.

The tools should be spaced out enough to allow easy movement around individual work stations. Ideally, this means leaving a space of separation between tools of at least three feet. You don’t want to be knocking into another tool or another worker while trying to complete your task.

It is often also a good idea to have a drain in the floor with certain projects for safe disposal of materials. The work shop should also be equipped with good lighting and plenty of ventilation to make breathing easier when all the dust starts flying.

Proper Storing Techniques

Power tools, especially the heavy ones, should be stored close to the ground or behind locked cupboards. Any apparatus with sharp blades or other parts should never be store overhead or on high on the wall. This could be disastrous if you were to slip when trying to retrieve it. And if your workspace is in a home where children are present, it is essential to store power tools behind locked cupboard doors to avoid any situations with curious little hands.

Emergency Preparation

Even with proper precautions, accidents do happen. Being prepared to handle them will made them easier to handle. Start by having a first aid kit on-hand, fully stocked and in an easily accessible place. Make sure any one using power tools in the work space knows where to find the first aid kit. The kits should include at least the following items: alcohol pads, band aids, gauze, medical tape and scissors. Fresh water for washing out cuts should also be readily available on site.

Other emergency preparations like fire extinguishers and smoke alarms should be in place and well-maintained. Keeping flash lights and a telephone nearby will also be useful in certain trouble situations.

Operating Safety

There are several ways to make the use of power tools safer. Goggles are an essential for protecting the eyes from flying wood chips and other particles. Everyone working in the workshop should have a pair. Keeping the safety devices on while using your tools will also prevent many accidents.

The wall sockets should never be overloaded with voltage. Make sure you never plug in too many tools into one socket and that your wires are the grounded three-wire system type. When it comes to power tool safety you can never be too cautious. Make sure you take all the proper steps to make your power tools helpful and not hurtful!

Power Tool Safety

Some of the power tools available are very powerful and oftenrotate at extremely high speeds. Hard carbide has very littletrouble with soft flesh. I have worked in remote areas where itwas sev…   Read more…

Power tools and safety equipments

Once you get to know all this information, it will be very easy for you to decide which type of tool that you need to get for your work. Another thing that one must always keep in mind while wo…   Read more…

Hand & Power Tool Safety Training Video

Technorati Tags: hand and power tool, hand tool safety, osha regulation, osha requirement, osha safety training, OSHA Training, power tool safety, safety instruction…   Read more…

Technorati Tags: power tool safety, power tools, powertool safety, safety tips

Not everyone will need a garage full of power tools. In fact, most people can make do with three or four essential pieces that handle a variety of common, everyday tasks. Here are some of the most useful (and most often borrowed from a neighbor and never returned) power tools that are easily rented in a local equipment rental store.

Cordless Power Drill

This indispensible power tool can perform a variety of tasks and will be used so often you may even need to replace it one day. Drills are important for putting together and dismantling simple pieces of furniture, placing shelves, hanging artwork, and many other handy around the home repairs.

Even the most power tool-shy individual will find them easy to operate and helpful. Don’t bother with the corded variety, as these can be dangerous and difficult to use. Also, find one with an extra battery, because if left unattended for a while, you may find it drained when you need it in a pinch.

Cordless Jigsaw

Not everyone will find this power tool helpful, but if you are interested in more in-depth home repairs or do-it-yourself projects, you’ll definitely need one of these. Jigsaws can make small, intricate cuts in wood including curved lines.

Of course, as is the case with power tools, the more features it has the more expensive it gets to be. Decide on the features that you would require for the job at hand and then buy a jigsaw. It doesn’t exactly make sense to rent a high tech one and use it for minor cutting jobs.

Chainsaw

This is the go-to power tool for any green thumb. If you have a large yard or many trees near your home, a chainsaw will come in handy when those branches begin to threaten your roof or power lines.

Electric Multi-Tools

These are more advanced versions of Swiss army knives. They are often small enough to fit in your hand and come with a variety of useful attachments including sanders, engravers, drills, cutting tools, grinders and polishers. They are handy for minor cosmetic repairs and fixing all of those annoying home repairs that pop up such as squeaky hinges, wobbly chairs, and splintery wood.

Power Screwdriver

Use a hand powered screwdriver? Get frustrated by stripping screws and smashing tender fingers? You can pick up a mini, battery-powered screwdriver on the cheap. This power tool is great for everyone, 1000 from college students attempting to construct confusing Swedish furniture, to those who don’t have the physical strength to dislodge tight screws, to clumsy people. It takes much of the frustration out of simple home repairs.

Power Tools for Home Improvement Jobs

Many do-it-yourselfers end up making one big mistake – using hand tools instead of power tools. You see, when you use power tools, you’ll save a whole lot of time, no matter wha…   Read more…

Power Drill Tools for Home Improvement Jobs

There are many different power tools out there that can prove to be helpful when it comes to home improvement. However, one of the most used tools for home improvement jobs happen…   Read more…

Home Improvement and Power Tools

Using power tools for home improvement projects is definitely a great option. They save you time, money, and more. However, many people don’t always know how to use these tools safely….   Read more…

Technorati Tags: 24v drills, DIY, home improvement, power tools, powertools, projects

Today’s manuals not only have better graphics showing its users what each part of the device should look like (and what to do when it doesn’t), many individual manufacturers will have explicit directions and instructions for the safety and maintenance of each individual power tool. Of course, no instructions are completely fool proof, especially if the content of such manuals isn’t completely understood by the user. This is why many manufacturers have implemented training seminars and classes for both companies and individuals on the proper procedures for optimum performance and safety. Local home improvement stores often hold such classes and seminars on a regular basis.

However, a bit of common sense and know-how never hurt anyone, so there are a few safety guidelines which should be followed by all users of power tools. For example, wearing the proper clothing is essential, and you should never wear loose clothing that could easily get caught in a power tool. Safety gear is crucial- hard hat, safety goggles and gloves, along with the proper footwear. Using the right tool, whether it be size or something else, for the job at hand, including the right type of extension cord (indoor, outdoor, proper length) if applicable. The work area should be clean, uncluttered and well lit. Keep all electric tools away from water and flammables. Do not use power tools with frayed or damaged cords. Damaged parts anywhere in a power tool, including saw blades and drill bits, can cause damage to the tool itself or the individual performing the task. Unplug all electric power tools when finished with or before changing to another tool.

As far as the maintenance aspect of such power tools, common sense is again of the highest importance. For example, making sure that the proper guards are placed on saw blades when not in use is both a safety and maintenance issue. Saw blades need to be sharp to deliver the best performance possible, but can also be incredibly dangerous, so taking the proper preventive measures will yield the best results in all aspects, not just pr 1000 oject outcome.

Power Tools 101 – What You Need to Know About Power Tool Use

It’s been said by many that power tools are man’s best friend. Powered by a compressed air motor, gasoline engine, or electric motor, they can be both stationary and portable. In this b…   Read more…

Power Tools 101: The Right Tool for the Job

Power Tools 101: The Right Tool for the Job. By Chrisjob. Types of Power Tools. Some say there are two basic groups of power tools: professional and homeowner. It’s more helpf…   Read more…

101 Snap on Power Tools help

101 Snap on Power Tools help General Tool Discussion.   Read more…

Technorati Tags: 101, 24v drills, DIY, handyman, power drills, power tools, powertools, tips and advice, woodworking

There are some who seem to be confused by all the different terminology surrounding power drills. Some of the common question we have been asked over the years are:

What does VSR mean?
What is the difference between SDS and spline drive?
How does chuck size matter?
What is the difference between keyed and keyless chucks?
What is a hex driver?
Should I go with a cordless or corded drill?
What type of cordless battery is best?
What is the clutch used for?

In order to answer some of these questions, we have put together this list of questions and answers that we hope will be found to be informative and helpful.

What does VSR mean?
VSR stands for variable speed reversible. Drills with this feature are able to operate in both forward and reverse rotation and at variable speeds. Most likely the drill will have a switch or button for switching the rotation from forward to reverse. Generally the speed varies in relation to to how far the trigger is pulled.

What is the difference between SDS and spline drive?
SDS and spline drive refer to two types of bit technology used in rotary hammer drills. There is really no difference in the performance of the two types, so the one you choose will simply be a matter of which type your particular rotary hammer drill requires. There are different sizes of SDS bits which include SDS, SDS+, and SDSmax. Smaller rotary hammer drills will use SDS or SDS+ bits where the larger rotary hammer drills will use SDSmax or spline drive bits. As the name implies, spline drive bits have a splined shaft, while SDS bits have concave recesses in the shaft.

Why does chuck size matter?
Chuck size basically determines what size drill bit you can use based on the size of the drill bit shank. With the exception of rotary hammer drills and impact drivers/wrenches which use a special type of chuck, most typical hand held drills come with either a 3/8" or 1/2" chuck. Most of your smaller drills will use a 3/8" chuck, which will accept bits with shank sizes up 3/8". The heavy-duty models typically use a 1/2" chuck which accepts bits with shanks up to 1/2" in size. You cannot put a drill bit with a 1/2" shank in a 3/8" chuck, but you can put a bit with a 3/8" shank in a 1/2" chuck.

What is the difference between keyed and keyless chucks?
Ye 1000 ars ago, all hand held drills used keyed chucks. In order to tighten the chuck down on the drill bit, you would use a small tool called a chuck key. Most 3/8" chucks and many 1/2" chucks today are now of the keyless variety. Keyless chucks, as the name implies, do not use a chuck key. Instead the chuck is designed so that a person can easily tighten the chuck down on the bit by hand. While keyless chucks are faster and easier to use, they cannot clamp down onto the bit as tight and therefore do not have the same holding power as a keyed chuck. This lack of holding power can potentially cause round shank bits to slip in the chuck. This is why you will still find many heavy-duty high torque drills using keyed chucks.

What is a hex driver?
A hex driver is just another name for an impact driver. Hex refers to the type of bit holder the drill uses. These drills use a hex shank bit designed not to slip in the holder. This type of bit holder also makes changing bits a snap. Impact wrenches, on the other hand use a square drive for accepting either 3/8" or 1/2" drive sockets.

Should I go with a cordless or corded drill?
This can be a difficult decision for some. The industry trend is ever going more and more towards cordless technology. The very first cordless drills on the market left much to be desired in both power and run time. Over the years cordless technology improved to the point where many cordless tools now compete with and even in many cases out perform their corded counterparts. With power and performance becoming near equal, the choice basically comes down to price. Are you willing to save some money and deal with the inconveniences of dragging power cords around, or would you rather spend a little more and have complete freedom of movement? The choice is yours.

What type of cordless battery is best?
The power tool industry is currently trending toward lithium-ion battery technology. With all the benefits of lithium-ion it is easy to see why. If you compare lithium-ion batteries to nickel cadmium batteries, lithium-ion charges faster, runs longer, maintains longer constant power output, weighs less and stores a charge longer. The disadvantage is that Lithium-ion costs more. However, the difference in price may not outweigh the advantages you get in performance and charge holding time. Having said that, not all lithium-ion batteries are created equal. There are many cheap off brands out there trying to pass off inferior lithium-ion batteries so be carefully. Many of these may not even perform as well as a quality ni-cad battery.

What is the clutch used for?
Most drill/drivers and hammer drills have an adjustable clutch. The clutch is typically used when driving screws, nuts, or lag bolts. The clutch is designed so that once a certain required amount of torque is reached, the clutch will engage and cause the rotation of the chuck to slip and stop rotating. There are several reasons for this. One, you won’t strip the screw head when the bit keeps turning. Two, you won’t drive the screw too deep. Three, reaction torque when the screw or nut bottoms out won’t twist your wrist. Many drills produce enough reaction torque to cause bodily harm if the clutch is not used. Many heavy-duty drills capable of producing high amounts of reaction torque have either a non-adjustable built in clutch or a built in torque limiter. And finally, the clutch protects the drill motor from damage.

Should You Buy Factory Reconditioned Power Tools?

If you’ve been reading here for awhile, you know we’re huge fans of reconditioned power tools. Why? Because reconditioned tools sell for about 25-60% off retail, and they almost …   Read more…

Power Tools 101 – What You Need to Know About Power Tool Use

It’s been said by many that power tools are man’s best friend. Powered by a compressed air motor, gasoline engine, or electric motor, they can be both stationary and portable. In this b…   Read more…

POWER TOOLS

Powertools.Us host a vast collection of power tools and hand tools.They can be used for various applications.Now all are available at a discount prices.All branded products are av…   Read more…

Technorati Tags: DIY, DIY tips, faq, power drills, power tools, powertools